This study investigates the reduction of torque ripple in Permanent Magnet Brushless DC Motors (PMBLDCM) by comparing the effectiveness of Sinusoidal Pulse Width Modulation (SPWM) and conventional Pulse Width Modulation (PWM) techniques. The absence of mechanical brushes and commutators in PMBLDC motors enhances durability, operational lifespan, and efficiency while reducing maintenance requirements. Despite these advantages, PMBLDC motors often experience excessive torque ripple, characterized by fluctuations in torque output, which can impair performance and operational stability. The primary objective of this research is to implement an advanced Space Vector Pulse-Width Modulation (SVPWM) technique to effectively minimize torque ripple in PMBLDC motors. Experimental results demonstrated a significant reduction in torque ripple with SVPWM, achieving 0.2% compared to 1.7% with SPWM and 2.28% with PWM. Total Harmonic Distortion (THD) was also lower with SVPWM at 6%, compared to 8% for SPWM and 10% for PWM, indicating superior harmonic suppression. Speed regulation was more precise with SVPWM, showing a deviation of only 1.5%, while SPWM and PWM exhibited deviations of 2.4% and 4.2%, respectively. Current ripple was also minimised, measuring 0.035% for SVPWM, 0.08% for SPWM, and 0.9% for PWM. Thermal performance favoured SVPWM, maintaining a temperature range of 50-56°C, while SPWM and PWM ranged between 59-66°C and 70-86°C, respectively. Efficiency analysis further confirmed SVPWM’s superiority, achieving 88-92% efficiency, compared to 85-87% for SPWM and 69-79% for PWM. These findings affirm that SVPWM outperforms both SPWM and PWM in key performance metrics, making it the preferred control method for high-precision, energy-efficient motor applications. The research concludes that SVPWM offers substantial advantages in reducing harmonic distortion, improving speed regulation, minimizing current ripple, and enhancing overall efficiency, contributing to the development of more reliable and sustainable PMBLDC motor systems for industrial use.

The reduction of torque ripple in a Permanent Magnet Brushless DC (PMBLDC) motor using the Space Vector Pulse-Width Modulation (SVPWM) method has proven highly effective in enhancing motor performance. By employing SVPWM, significant improvements were observed in torque stability, reduced harmonic distortion, and enhanced speed regulation, all contributing to smoother motor operation. The technique’s ability to minimize current ripple and manage thermal performance further reinforces its suitability for precision control applications. Ultimately, SVPWM stands out as a superior control strategy for PMBLDC motors, offering increased efficiency and operational reliability in modern motor drive systems.

[1] R. K. Achary, S. Durgaprasanth, C. Nagamani, and G. S. Ilango, “A simple voltage modulator scheme for torque ripple minimisation in a permanent magnet brushless DC motor,” IEEE Transactions on Power Electronics, vol. 35, no. 3, 2020, doi: 10.1109/TPEL.2019.2926122. [2] B. Deesor, P. B. Biragbara, and H. N. Amadi, “Reduction of torque ripple in a permanent magnet brushless DC motor using space vector pulse-width modulation method,” International Journal of Electrical Engineering and Ethics, vol. 8, no. 4, 2025. [3] M. F. Fazdi and P. W. Hsueh, “Parameters identification of a permanent magnet DC motor: A review,” Electronics, vol. 12, no. 12, 2023, doi: 10.3390/electronics12122559. [4] L. Gao and R. Zhang, “Design analysis and control of a permanent magnet brushless DC motor in micro electric vehicle,” Australian Journal of Electrical and Electronics Engineering, vol. 18, no. 4, 2021, doi: 10.1080/1448837X.2021.1982444. [5] C. L. Huang, F. C. Lee, C. J. Liu, J. Y. Chen, Y. J. Lin, and S. C. Yang, “Torque ripple reduction for BLDC permanent magnet motor drive using DC-link voltage and current modulation,” IEEE Access, vol. 10, 2022, doi: 10.1109/ACCESS.2022.3173325. [6] U. K. Potnuru and P. Mallikarjuna Rao, “An innovative methodology in design of a permanent magnet brushless DC motor for a particular application,” International Journal on Emerging Technologies, vol. 11, no. 2, 2020. [7] S. Krishnamoorthy and P. P. K. Panikkar, “A comprehensive review of different electric motors for electric vehicles application,” International Journal of Power Electronics and Drive Systems, vol. 15, no. 1, 2024, doi: 10.11591/ijpeds.v15.i1.pp74-90. [8] S. I. Suriano-Sánchez, M. Ponce-Silva, V. H. Olivares-Peregrino, and S. E. De León-Aldaco, “A review of torque ripple reduction design methods for radial flux PM motors,” Eng, vol. 3, no. 4, 2022, doi: 10.3390/eng3040044. [9] H. Wang, K. T. Chau, W. Liu, and S. M. Goetz, “Design and control of wireless permanent-magnet brushless DC motors,” IEEE Transactions on Energy Conversion, vol. 38, no. 4, 2023, doi: 10.1109/TEC.2023.3292178. [10] M. Xu, G. Liu, Q. Chen, J. Ji, and W. Zhao, “Design and optimization of a fault tolerant modular permanent magnet assisted synchronous reluctance motor with torque ripple minimization,” IEEE Transactions on Industrial Electronics, vol. 68, no. 9, 2021, doi: 10.1109/TIE.2020.3016263. [11] L. Zhang, J. Bao, S. Ge, X. Yang, Y. Yin, and Z. Bao, “Permanent magnet driving technology and its application status in the field of mining equipment,” Coal Science and Technology, vol. 50, no. 3, 2022, doi: 10.13199/j.cnki.cst.2020-0226. [12] B. Peace, S. L. Amadi, H. N. Idoniboyeobu, D. C. Ahiakwo, and C. O. Braide, “Enhancement of PV-wind plant output power via the adaptive neuro-fuzzy inference system,” International Journal of Research in Engineering and Science (IJRES), vol. 11, no. 3, pp. 54–60, Mar. 2023. [13] D. C. Idoniboyeobu, S. Orike, and P. B. Biragbara, “Optimization of a grid-connected photovoltaic system using fuzzy logic control,” European Journal of Electrical Engineering and Computer Science, vol. 1, no. 2, Nov. 2017. [14] P. B. Biragbara and D. Baridaakara, “Grid stability and power quality analysis of 65 MW solar photovoltaic integration into the 132 kV transmission network in Port Harcourt, Nigeria,” Indonesian Journal of Electrical Engineering and Renewable Energy, vol. 5, no. 2, pp. 127–137, 2025.